ABB M2000 - Page 243

3 Maintenance
3.7.4. Setting the SIS parameters
2413HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
3. Select "0 SIS parameters"
and press "Enter".
en0200000047
xx0100000200
4. Select the required system
The parameter list is
displayed.
en0200000048
en0200000049
5. Select the required
parameters by stepping up
and down through the
parameter list.
Available parameters are described in section SIS system
parameters on page 238.
Action Note
Continued
工控帮助教小舒QQ2823408167
长沙工控帮教育科技有限公司