4 Repair
4.5.6. Restoring the balancing device using a hydraulic press tool.
3HAC022033-001 Revision: K326
© Copyright 2004-2011 ABB. All rights reserved.
9. Refit the rear cover to the balancing device with
its attachment screws, using locking liquid.
Apply sikaflex 521FX on the cover.
xx0200000175
• E: 4 pcs: M10x30, tightening
torque: 50 Nm.
Locking liquid is specified in Required
equipment on page 325.
10.
DANGER!
The rear cover of the balancing device is a
safety device for the piston rod during operation!
Make sure the cover is properly secured before
commissioning of the robot!
Action Note
Continued
To Next Page
Loading...
