ABB M2000 - Page 342

4 Repair
4.6.2. Replacement of motor axis 2
3HAC022033-001 Revision: K340
© Copyright 2004-2011 ABB. All rights reserved.
10. Fill the four screw recesses on the new motor with
Sikaflex. (After hardening, Sikaflex can be formed
with a knife)
xx0600002875
• A: Motor unit
• B: Sikaflex in screw
recesses
11. Continue to refit the new motor according to
section, Refitting, motor on page 336.
12. Perform a leak test according to Inspection of air
hoses (Foundry Prime) on page 191.
Action Note
Continued
工控帮助教小舒QQ2823408167
长沙工控帮教育科技有限公司