Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 41.
2
xx2100001295
Fit the computer and logic unit to the
bottom.
3
Move the computer and logic unit to the
locking position.
4
Screws: Torx pan head screw M4x8 (3 pcs)Fasten the computer and logic unit with
the screws.
5
Tightening torque: 1.7 Nm±10%
xx2100001338
Reconnecting the connectors to the computer and logic unit
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 28.
1
Continues on next page
144 Product manual - OmniCore E10
3HAC079399-001 Revision: C
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.5 Replacing the computer and logic unit
Continued
To Next Page
Loading...
