IEC09000357 V1 EN
Figure 47: Select the TCP/IP protocol and open Properties
4. Select Use the following IP address and define IP address and Subnet mask,
see
Figure 48. The IP address must be different from the
IP address chosen for
the IED.
IEC09000658 V1 EN
Figure 48: Select: Use the following IP address
5. Use the ping command to verify connectivity with the IED.
6. Close all open windows and start PCM600.
Section 8 1MRK 504 088-UEN C
Set up the PCM600 communication link per IED
86
Installation and commissioning manual
To Next Page
Loading...
