ScreenMaster RVG200
Paperless recorder 7 Configuration
OI/RVG200-EN 107
Note. The following parameter is applicable only to digital totalizers.
Count rate Set the required totalizer count rate.
A digital totalizer pulse can be scaled to represent a value of between
0.00001 and 1000.00000. The totalizer is then incremented by this
amount each time there is an off / on transition.
Example – a count of 5 digital pulses with Count rate set to 100
increments the totalizer from 0 to 500 in 100 unit steps.
Input signal
Units
Totalizer value
1 minute
1 minute
On
Off
To Next Page
Loading...
