ScreenMaster RVG200
Paperless recorder Appendix F – Character entry
180 OI/RVG200-EN
Appendix F – Character entry
When using the new QWERTY keyboard the following characters are available for all text data entry:
a to z, A to Z, 0 to 9, ' ' '[' ']' '{' '}' '(' ')' '+' '-' '=' '_' '^' ''' '#' '&' ';' '!' '@' '%' '$' .
'Special' characters '£' '/' '\' '<' '>' ':' '*' '"' '?' '|' '~' '°' '
2
''
3
' '·' '.''µ' are also available but, to comply with
standard MS Windows filenaming convention, their use is prevented in file names and any text that is
displayed in log views. Therefore, special characters are not permitted in:
Language-specific characters (for example, ç, á, â, ë, ì, ñ, ö, ß etc.) are not supported.
These limitations also apply to the scanner and PC emulation. If invalid characters are scanned in or typed
in using the keyboard, the user is warned that invalid characters have been detected and are being
replaced by the underscore '_' character.
No other characters can be entered using the recorder's keyboard or scanner or PC emulation. Web
browser users do not have any limits applied and may not need any.
Configuration
level
– Instrument tag
– Group recording tag
– Batch field 1 title
– Batch field 2 title
– Batch field 3 title
– Usernames
– Operator messages
Operator views – New batch dialog Batch number and Batch field 1 to 3 entries
– User-defined operator message
– Chart signatures
Note.
Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear
truncated in some Operator views. In such cases, use lower case letters or fewer characters.
The superscript 3 (
3
) may not be displayed correctly in all Operator view configurations. If used,
check that it is displayed correctly.
To Next Page
Loading...
