ScreenMaster RVG200
Paperless recorder 7 Configuration
66 OI/RVG200-EN
7.6 Exiting the configuration level
Referring to Fig. 7.7, exit the Configuration level as follows:
a From the main System Configuration menu, touch .
b To apply changes and begin using a configuration immediately, touch – see Note 1 on page 67.
The configuration is saved to internal memory with the filename
'<time> <date> <instrument tag>.cfg' and the recorder returns to the Operating level.
A warning is displayed if the configuration change will result in the creation of new data files. Touch
to accept the changes or to reject them.
c Touch to export the current configuration to selected storage media – see Note 2 on page 67.
d Touch to return to the Configuration level to continue configuring the recorder.
e Touch to discard all changes and return to the Operating level.
Fig. 7.7 Exiting configuration mode
1
2
3
5
4
Configuration change
causes the internal
recording data files to
be recreated
Configuration change
does not cause the
internal recording data
files to be recreated
Apply Changes
Export Configuration
Return to Configuration Mode
Discard Changes
Changes saved
Changes discarded
Select the required
storage media
Internal Storage
SD Card
Front USB
Please Wait
To Next Page
Loading...
