ScreenMaster RVG200
Paperless recorder 7 Configuration
128 OI/RVG200-EN
7.11.2 Real-time alarms
RTA1 (to 4)
Alarm tag Enter the tag to be used in the Alarm Event log.
Refer to Appendix F, page 180 for further information regarding character
use in tags.
Daily enables Select the day(s) on which the alarm is activated.
1st of month enable Set to On to activate the real-time alarm on the first day of each month.
On time Set the time at which the alarm becomes active.
If Every hour is set to On, the Hours setting cannot be adjusted and the
alarm is activated at the same time every hour (determined by the Minutes
setting) or on the hour (if Minutes is set to Off).
Duration Set the duration for the alarm to remain active.
Log enable Set to On to add an entry to the Alarm Event log each time the real-time
alarm becomes active.
To Next Page
Loading...
