ScreenMaster RVG200
Paperless recorder 3 Installation
10 OI/RVG200-EN
3 Installation
3.1 Siting
EC Directive 89/336/EEC
In order to meet the requirements of EC Directive 89/336/EEC for EMC regulations, this product must
not be used in a non-industrial environment.
Cleaning
The front of the recorder can be hosed down if it has been installed in a panel correctly – see Fig. 3.4,
page 13. Warm water and a mild detergent can be used.
Fig. 3.1 General siting requirements
A – Close to sensors
B – At eye-level location
C – Avoid vibration
Keep distance to a minimum
Sensors
To Next Page
Loading...
