ScreenMaster RVG200
Paperless recorder 3 Installation
OI/RVG200-EN 11
Fig. 3.2 Environmental requirements
Warning.
Locate the recorder in a position where its temperature and humidity specification are not
exceeded and ensure it is suitably protected from direct sunlight, rain, snow and hail.
Select a location away from strong electrical and magnetic fields. If this is not possible, particularly
in applications where mobile communications equipment is expected to be used, screened
cables within flexible, earthed metal conduit must be used.
IP66 / NEMA 4X
A – Within temperature limits B – Within humidity limits
C – Environmental protection standards
5to95%RH
D – Use screened cable
0°C
(32 °F)
minimum
50 °C
(122 °F)
maximum
To Next Page
Loading...
