ABB ScreenMaster RVG200 - Making Changes to Parameters

ScreenMaster RVG200
Paperless recorder 7 Configuration
64 OI/RVG200-EN
7.5 Making changes to parameters
Referring to Fig. 7.5, parameters are located as follows:
a Configuration tab.
b Parameter.
c Parameter value.
d Edit button.
e Sub-menu.
f Higher-level windows remain visible to identify location within the configuration structure.
g Selection list.
h Touch an option or use and to select it. Touch to accept the selection.
i Touch to close a menu.
j Touch to go to next / previous channel.
Note. The appropriate data entry box is displayed automatically.
Fig. 7.5 Locating parameter settings
1
2
3
4
5
6
7
8
9
10