ABB ScreenMaster RVG200 - Relay Modules

ScreenMaster RVG200
Paperless recorder 7 Configuration
114 OI/RVG200-EN
7.10.2 Relay modules
Relay A1(to D6)
Source Select the relay source (a digital source) to be used to energize /
de-energize the relay.
Note. If the relay is used to provide a totalizer count pulse, the maximum
pulse frequency is 4 Hz. Consideration must also be given to the
mechanical life of the relay.
Polarity Select the relay source polarity.
Note. When polarity is set to Positive, the relay is energized when the
digital source is active (On).