ABB ScreenMaster RVG200 - Appendix E - Batch Recording; Introduction

ScreenMaster RVG200
Paperless recorder Appendix E – Batch recording
OI/RVG200-EN 173
Appendix E – Batch recording
E.1 Introduction
The recorder's batch recording function enables:
 storage of archived data in batch format
 the operator to identify the batch data by name and / or number
 the operator to enter essential batch information that is then is recorded with the data
 the operator to start and stop batch recording from the front panel or via remote signals
 the operator to archive the internally-recorded values so that the data for each batch can be
retrieved easily and reviewed
 the retrieval of data from the recorder based on its batch identity
In addition, using the Company's DataManager Pro data analysis software package, batched data
can be located and retrieved using its batch identity
A Batch Log archive file is created that contains all the identification data for each batch. Its filename is
formatted as described in Table 6.2 on page 56.
The Alarm Event Log archive files also contain details of all batch start and stop events.
Note. The batch recording tabs are displayed only if the Batch option is enabled.