ScreenMaster RVG200
Paperless recorder 5 Logging
OI/RVG200-EN 51
5.1.1 Password entry
Enter password
1. Enter the required password using the keyboard.
2. Touch to complete password entry.
Change password
1. Touch Change Password.
2. Touch to display the character entry keyboard.
3. Enter the old password using the keyboard and touch .
4. Enter the new password using the same procedure as for the old
password.
5. Enter the new password again to confirm it.
6. Touch .
Password change successful.
Note. If is touched at any stage before the new password is
confirmed, the password change operation is cancelled and the
following message is displayed:
Password expired
Passwords can be configured to expire at pre-determined intervals. If a
password is time expired, this screen is displayed automatically. Enter a
new password as described above.
Change Password
Operator 1– Change Password
Old password
New password
Confirm new password
PASSWORD CHANGED
Operator 1
PASSWORD NOT CHANGED
Operator 1
Old password
Operator 1– Change Password
New password
Confirm new password
Your password has expired.
Please enter a new password
To Next Page
Loading...
