ABB ScreenMaster RVG200 - Page 75

ScreenMaster RVG200
Paperless recorder 7 Configuration
OI/RVG200-EN 73
Daylight Saving - Enable Select the daylight saving method.
Note. Changes to daylight saving are effective immediately a method is
selected. However, if is touched when exiting the Configuration
level (see Fig. 7.7, page 66), the last saved daylight saving settings are
restored.
Off Daylight saving is disabled.
Auto – USA The start and end of the daylight saving period in the
USA is calculated automatically.
The clock is incremented automatically by 1 hour at
2:00am on the second Sunday in March and
decremented automatically by 1 hour at 2:00am on the
first Sunday in November.
Auto – Europe The start and end of the daylight saving period in
Central Europe is calculated automatically.
The clock is incremented automatically by 1 hour at
2:00am on the last Sunday in March and decremented
automatically by 1 hour at 2:00am on the last Sunday in
October.
Auto – Custom The start and end of the daylight saving period can be
configured manually for regions that do not follow either
the USA or Europe conventions.
The clock is incremented automatically by 1 hour at the
manually selected start time and decremented
automatically by 1 hour at the manually selected end
time.
Daylight Saving - Start
Daylight Saving - End
If Daylight Saving – Enable is set to Auto – USA or Auto – Europe, the
start and end times are set automatically and cannot be changed.
If Daylight Saving – Enable is set to Auto – Custom, set the start and end
of the daylight saving period.