ScreenMaster RVG200
Paperless recorder 7 Configuration
OI/RVG200-EN 89
Note. The following parameters are displayed only if Scale type is set to Log.
Low Select the lower limit of the log decade range to be displayed on the Chart
view scale.
High Select the upper limit of the log decade range to be displayed on the
Chart view scale.
Numerical Display Select the format in which the process value is to be displayed;
Exponential
Standard
–
–
displays all values in the form x.xE±y where x is any
number from 0 to 9 (and 99 is out of range).
display all values in exponential form as above, except
those that fall within the low and high limits.
Note. The following parameters are displayed only if Numerical Display is set to Standard.
Low Limit Enter the low limit, in engineering units, below which values are displayed
in exponential form.
High Limit Enter the high limit, in engineering units, above which values are displayed
in exponential form.
To Next Page
Loading...
