12-2
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 12: Maintenance
Turn o the meter prior to cleaning. Wipe all surfaces until the meter is visibly clear of soil. Do not apply cleaning solution
directly to the meter. If using a pre-packaged wipe, squeeze out excess uid prior to use. Do not immerse or autoclave the meter
or ood it with any liquid. ese steps will help keep liquid from entering the meter and causing damage.
IMPORTANT: Avoid getting dust, dirt, blood, control solution, water or any other substance in the
meter’s test strip port.
To Next Page
Loading...
