12-6
Questions? Refer to Page 11-22 For Technical Support Instructions.
5. Pull the tab to remove the batteries. (Fig. 4)
6. Discard the used batteries in compliance with your local government regulations.
7. Insert the new batteries on top of the tab, using the + and - symbols in the battery
compartment to position the new batteries with the correct polarity. (Fig. 5)
8. Align the battery compartment cover with the slots on the FreeStyle Precision Pro meter,
then slide the cover into place. (Fig. 6)
Note: New batteries need to be installed within 24 hours after the old batteries are
removed from the battery compartment to maintain the meter date and time.
e European Battery Directive requires separate collection of spent batteries, aiming
to facilitate recycling and to protect the environment. e batteries in this product
should be removed and disposed in accordance with local regulations for separate
collection of spent batteries. Contact the manufacturer for details.
Figure 4
Figure 5
Figure 6
Chapter 12: Maintenance
To Next Page
Loading...
