3-12
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 3: Patient Test
What You See on the Display What You Do Comments
11. Wait for the meter to analyse the sample
and display the test result.
The meter counts down, then displays the
test result. If an error is detected during
the assay, the assay is terminated and no
result is displayed. Once the assay begins,
all key presses are ignored until the assay is
completed.
100 mg/dL
12. If required, scan or manually enter the
comment code and press Enter.
If there is no prompt to enter a
comment code, skip down to step 13.
The meter may be enabled to scan or enter a
1- to 2-digit comment code.
100 mg/dL
If prompted, scan or manually enter the free
text information and press Enter.
If there is no prompt to enter free text, skip
down to step 13.
The meter may be enabled to scan or enter
the free text information. Up to two free text
fields may appear.
To Next Page
Loading...
