4-2
Questions? Refer to Page 11-22 For Technical Support Instructions.
• Do not use control solutions after the expiry date printed on the bottles and the box. After the bottle has been opened, do
not use after the discard date written on the bottle.
• Invert the control solution bottle several times to ensure thorough mixing before use.
• Invert and tap the capped control solution bottle to remove air bubbles from the tip of the bottle.
• Wipe the control solution nozzle with a clean gauze or tissue before and after each test.
• Do not scan one test strip foil packet’s barcode and use a test strip from another foil packet. This may cause incorrect results
to be generated.
• Replace the correct cap on the bottle and tighten the cap immediately after each use.
When To Test with Control Solutions
• As required by your facility’s quality policy or local regulatory requirements.
• To verify the performance of the FreeStyle Precision Pro system.
Chapter 4: Control Test
To Next Page
Loading...
