MC81F4204
April 24, 2012 Ver.1.41 3
REVISION HISTORY
VERSION 1.41 (April 24, 2012) This book
Add the chapter ’ 7.10 POR Electrical CHARACTERISTICS’.
VERSION 1.40 (May 21, 2011) This book
Update 20QFN pin assignment and package diagram.
VERSION 1.39 (December 28, 2010) This book
Change ‘5.5v’ to “VDD level” in DC Electrical Characteristics description(page 27/28).
Change ‘5.0v’ to “External RC Condition” in DC Electrical Characteristics description(page 34).
Change ‘5.0v’ to “Internal RC Condition” in DC Electrical Characteristics description(page 35).
VERSION 1.38 (November 10, 2010) This book
Update 20TSSOP pin assignment and package diagram.
VERSION 1.37 (December 23, 2009) This book
Update the chapter ’ 22.3 Reset circuit’.
Add Reset pin information.
VERSION 1.36 (December 15, 2009) This book
Update the chapter ’ 22.3 Reset circuit’.
VERSION 1.35 (October 19, 2009) This book
Add a note about SCK port at R0CONM register description.
Change EVA.board picture. (the board’s color is changed from blue to green)
VERSION 1.34 (September 30, 2009)
Correct the duty equation of PMW0/1.
Add more tools at “1.3 Development Tools”.
VERSION 1.33 (September 18, 2009)
Add more descriptions at PWM function descriptions.
VERSION 1.32 (September 4, 2009)
Remove rising/falling time at LVR electrical characteristics.
Change ‘1.83v’ to “POR level” in POR description.
Add POR level at “DC CHARACTERISTICS”.
Add ROM option read timing information.
Add “Typical Characteristics”.
VERSION 1.22 (August 12, 2009)