3-24 Machine Maintenance Procedures
Touchpad Board Installation 0
1. Install and align board (A, Figure 3-20) to upper cover guide pins (F). (Figure 3-21)
Figure 3-21. Touchpad Board with Screws
2. Install and secure two (2) screws (E) to board. (Figure 3-20)
3. Install board FFC (D) to adhesive strip on touchpad module.
4. Connect board FFC (B) to touchpad module connector (C).
5. Install upper cover.
ID Size Quantity Image
E M2x3 t=0.04 2
To Next Page
Loading...
