Machine Maintenance Procedures 3-17
DIMM (Dual In-line Memory Module) Module Removal 0
Prerequisite:
Lower Cover Door Removal
1. Locate module (D) on lower cover. (Figure 3-9)
2. Push module clips (A) outwards. (Figure 3-13)
Figure 3-13. DIMM Modules
3. Pull module out of mainboard connector (B).
DIMM Module Installation 0
1. Connect module to mainboard connector (B) (Figure 3-13).
2. Push down on module until clips (A) lock in place.
3. Install lower cover door.
To Next Page
Loading...
