3-36 Machine Maintenance Procedures
Speaker Module Removal 0
Prerequisite:
Mainboard Removal
1. Locate module (E) on upper cover. (Figure 3-22)
2. Remove two (2) screws from lower cover. (Figure 3-36)
Figure 3-36. Lower Cover with Speaker Module
3. Remove module cable from lower cover guides (G).
4. Remove module and cable from lower cover.
Speaker Module Installation 0
1. Install module and cable to lower cover. (Figure 3-36)
2. Secure module cable to guides on lower cover (G).
3. Install and secure two (2) screws to lower cover.
4. Install mainboard.
ID Size Quantity Image
B M2x3 t=0.04 2
To Next Page
Loading...
