ACIST CVi - Connect the X-Ray Interface Cable on; Standard Systems (Optional)

ACIST | CVi® System User's Guide 901418-003,01 2019-08 English (USA) | 57
Cabling7 Supplementary Procedures
Connect the X-Ray Interface Cable on Standard Systems (Optional)
CAUTION
To avoid damaging the X-ray imaging equipment, make sure the connector
on the X-ray imaging system is properly congured before the input cable is
connected to the CVi system.
Connect the imaging interface cable from the injector head directly to the
X-ray imaging system.
To X-ray imaging
system