ACIST CVi - Aseptic Technique for Patient Kits

Aseptic Technique
6 | English (USA) 2019-08 901418-003,01 ACIST | CVi® System User's Guide
1 Introduction
monitored at all times, and specic operational and mechanical integrity
must be maintained to ensure patient safety.
• Support personnel must ensure that:
ӽ All system connections are in place, secure, and functional.
ӽ Proper grounding and isolation standards are maintained.
ӽ Operational and calibration checks are made prior to each use of the
system.
ӽ Proper support equipment (for example, a debrillation unit) is on site
for immediate response to patient distress.
Employ proper aseptic technique in the handling and use of all patient kits.
Sterile openings must be handled with care to ensure contact with only sterile
connections or a disinfecting cap. e use of gloves is preferred but not
required.
is User’s Guide provides instructions for setting up and using the CVi
system. It includes the following sections:
Section Purpose
1 Introduction Identies the purpose and structure of
this guide.
2 Warnings, Cautions, and
Symbol Denitions
Users must read and understand this
section thoroughly before using the CVi
system.
3 System Description Provides an overview of the system,
its components, and the touchscreen
interface.
4 Setup Describes the steps necessary to set up a
new case.
5 Perform an Injection Describes the steps for performing a
contrast injection with the CVi system.
6 End a Case Describes the steps for ending a case
and, if desired, starting a new case or
shutting down the system.
7 Supplementary Procedures Provides instructions for cleaning,
maintenance, and infrequently used
options
8 Troubleshooting Provides answers to frequently asked
questions, as well as a list of system
messages.
9 Specications Provides technical specications for the
CVi system.
10 EMC Tables Provides EMC tables.
11 Limited Warranty Describes the limited warranty for the
CVi system.
Aseptic
Technique
About This User’s
Guide