ACIST CVi - Hemodynamic Transducer; Supported Imaging Systems

ACIST | CVi® System User's Guide 901418-003,01 2019-08 English (USA) | 85
Hemodynamic Transducer9 Specications
Refer to the following specications for Smiths Medical LogiCal® Pressure
Transducer product code MX960. e following specications are current as of
the date on this document and are subject to change by the manufacturer.
Specication Range
Pressure measurement –30 mmHg to +300 mmHg
Sensitivity 5 µV / V / mmHg nominal
Output impedance
300 Ohm ± 10%
Input impedance 630 Ohm nominal
Balance
0 mmHg ± 50 mmHg
Temperature sensitivity coecient
0 ± 0.1% / °C
Temperature coecient of calibration
value
0 ± 0.3 mmHg / °C
Excitation 4–8 VDC to 5 kHz
Risk current <5 µA at 115 VAC, 60 Hz
Overpressure withstand –400 mmHg to +4000 mmHg
Debrillation capacity 5 discharges in 5 min at 360 J
15% pressure transducer bandwidth > 200 Hz
e CVi system synchronizes with the following X-ray imaging systems. is
table reects current interface capabilities as of this revision. Please contact the
manufacturer for any updates if your system is not identied here.
Manufacturer Model
GE Discovery Series
Innova Series
OEC 9x00 Series
Optima Series
Unity Series
Phillips Allura Xper Series
Shimadzu AngioSpeed Series
Bransist Sare Series
Digitex Sare Series
Heart Speed Series
Siemens AXIOM Series
Toshiba Innix Cleve I Series
Innix i-series
Hemodynamic
Transducer
Supported
Imaging Systems