49
Note! In order to facilitate contact with the service, keep the software version information, for
instance I700 or P700 and compilation version, for instance K-00 (where 00 in both cases
may be different), handy. Versions are displayed when the power is turned on (after the
countdown) or upon entering the installer’s menu.
XXI. LIST OF CHANGES IN SOFTWARE VERSIONS
– K-00 to K-12: Correction of minor errors. Calling in the first position when
selecting the apartment number.
Change the logo when calling to "bells".
– K-13: Correction of ACC operating commands for 4 zones .
Correction of installer's program 8 show the card.
Correction of access procedures to unit’s memory - improved
communication with the PC.
– K-14: Access to the installer’s menu using installer’s card/key fob -
disabled.
Correction of the line short circuit to power supply + procedure
– K-15: Change in the factory settings reset procedure. Data control in
unit’s memory. Installer’s code non-resettable and is factory pre-set as the
last four digits of the unit serial number. The serial number is stored in
unit’s memory. Resetting Intro message using buttons on the unit -
disabled.
ACO Sp. z o.o. sp. komandytowa, 62-002 Suchy Las, ul. Diamentowa 7, tel./ fax 61 843 93 72
www.aco.com.pl
IU0408envD.2021
To Previous Page
Loading...
