128 Accessories and options
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
• The patient is in cardiac arrest or shock
• The sensor is too tight
• There is arterial occlusion proximal to the sensor
• There is excessive illumination from light sources such as a surgical lamp, a bilirubin lamp, or
direct sunlight
An alarm condition due to reached alarm limit is displayed with a Red alarm icon at the
corresponding alarm limit and as a flashing text with Yellow background in the Information bar.
Figure 35 High SpO
2
Alarm
The actual alarm limits and state (OFF) are also displayed in the graphical view next to the numeric
values with the high/low alarm limit symbol.
Figure 36 Alarm limits
To Next Page
Loading...
Need help?
General
