Sterilization / cleaning / disinfection 143
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
14.2.4 Disassembly
1. Remove the exhalation membrane holder and membrane from the ventilator:
• Disassemble the membrane holder from the expiratory limb port by rotating the holder a
quarter of turn in counter-clockwise direction and then pull it out from the port.
Containers are recommended to transport used accessories between the NICU and the
cleaning/sterilization area.
2. Remove the exhalation membrane from the exhalation membrane holder:
• Before cleaning the membrane holder and the membrane, disassemble the exhalation
membrane from the membrane holder by pulling out from the second circumference of the
exhalation valve membrane.
14.2.4.1 Preparation for sterilization by automated cleaning
Please follow the steps below:
1. Rinse under running cold tap water (<35°C / 95°F) to remove excess soil.
2. Prepare a detergent bath using Neodisher Mediclean Forte solution at the manufacturer’s
recommendation of 10 mL per Liter using utility (tap) water 20°C / 68°F - 30°C / 86°F.
3. Transfer the cassette items on to the 4-Level manifold rack accessory (or other appropriate rack
system) contained inside the washer for processing.
4. Select the appropriate cycle as listed below:
To Next Page
Loading...
Need help?
General
