To Next PageTo Next Page
Need help?Do you have a question about the ACUTRONIC fabian HFO and is the answer not in the manual?
General| Brand | ACUTRONIC |
|---|---|
| Model | fabian HFO |
| Category | Medical Equipment |
| Language | English |
Guide on how to use the manual for understanding ventilator operation.
Explains categories of notices, warnings, and cautions for safe operation.
Defines symbols used throughout the document and on equipment labels.
Lists essential safety rules and warnings for operating the ventilator.
Specifies the device's purpose, target patient population, and environment.
Lists all items included in the fabian HFO ventilator package.
Details the ports and connectors on the front panel of the fabian HFO device.
Describes the key elements of the control panel, including touch screen and buttons.
Explains the layout and information areas of the ventilator's display screen.
Outlines steps for setting up the ventilator before patient connection.
Details the procedure for powering on the ventilator and initial checks.
Details the essential checks to perform before each ventilator use.
Explains how to calibrate the device's sensors (Flow, O2, etCO2, SpO2).
Covers brightness, touch screen locking, and graph display options.
Details the configuration of various ventilation parameters and their ranges.
Describes how to adjust and manage alarm limits for patient safety.
Provides a table mapping alarm messages to causes and resolution steps.
Explains behavior during power failure and battery switchover.
Details how to connect and operate the device using an external 24V DC power source.
Explains the Intermittent Positive Pressure Ventilation mode and its parameters.
Describes High-Frequency Oscillation ventilation and its specific functions.
Lists approved accessories and options for the fabian HFO ventilator.
Covers sensor types, connection, and settings for etCO2 monitoring.
Explains setup and settings for the SpO2 monitoring module.
Details the PRICO feature for FiO2 adjustment based on SpO2 targets.
Explains the FOT procedure, layout, and specifications for lung mechanics measurement.
Specifies how to properly dispose of the ventilator and its components.
Provides instructions for cleaning and disinfecting the ventilator.
Details cleaning, disinfection, and sterilization procedures for the flow sensor.
Explains how to set up and operate the Volume Guarantee ventilation mode.
Provides a step-by-step guide for initiating the Volume Guarantee function.
Guides the setup and procedure for delivering Nitric Oxide with the ventilator.
Specifies the environmental conditions for operation, transport, and storage.
Details the accuracy, range, and resolution for various device measurements.
Outlines EMC guidelines, emissions, and immunity requirements for device operation.
