ACUTRONIC fabian HFO - External Power Source Operation; Connecting External Power

Operating on External Power Source (devices with SN till AI-01500 and AL-00400) 87
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
9 Operating on External Power Source (devices
with SN till AI-01500 and AL-00400)
The device can also be operated from an external power source.
In this case connect the external 24 Volt power source at the back of the equipment.
Conventional mode: 24 Volt DC, 1 A
HFO mode: 24 Volt DC, 1.5 A
External power connection on the back panel.
NO charging when connected to 24V DC external power supply
NO monitoring of remaining time on external power supply