ACUTRONIC fabian HFO - Display Settings

62 Configurations menu
fabian HFO | SW 5.1.x
Ref: 113003.EN / Date 2020-02-10
6.2 Body weight setting
You can set the patient’s body weight in the calibration menu. This setting is
used to calculate and display the VTe BW [mL/kg] Numeric measurement in
IPPV and SIPPV modes.
6.3 Display
1. Adjust screen brightness, four levels.
2. Lock Touch screen. The screen will automatically be unlocked if an alarm is triggered
or the rotary push knob is pressed.
The Touch screen automatically locks after a set time.
3. Display Graphs as filled or regular lines.
Auto scale ON / OFF
1
2
3
4