Need help?Do you have a question about the ACUTRONIC fabian and is the answer not in the manual?
General| Type | Neonatal and Pediatric Ventilator |
|---|---|
| Manufacturer | ACUTRONIC Medical Systems AG |
| Model | fabian |
| Respiratory Rate | 1 - 150 bpm |
| FiO2 Range | 21 - 100% |
| HFOV Frequency | 5 - 20 Hz |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Modes of Ventilation | SIMV, CPAP, HFOV |
| Tidal Volume Range | 2 to 300 ml |
| PEEP/CPAP | 0-20 cmH2O |
| Inspiratory Time | 0.1 to 3 seconds |
| Flow Rate | 2 - 30 L/min |
| Flow Sensor | Integrated |
| Pressure Limit | 10-80 cmH2O |
Presents critical safety warnings and precautions for proper ventilator use.
Specifies conditions where the ventilator should not be used.
Describes the key elements and buttons of the device's control panel.
Details navigation and operation within the ventilation settings menu.
Steps to prepare the device before starting operation, including connections.
Procedure for powering on the ventilator and initial self-tests.
Instructions for safely powering off the ventilator.
Procedure for immediate shutdown in emergency situations.
Outlines essential pre-use checks and calibration steps for the ventilator.
Guides through calibration procedures for sensors and device functions.
Covers adjusting parameters like O2 Flush, leak compensation, and units.
Allows manual or automatic adjustment of alarm limits and volume.
Lists common alarms, their causes, and recommended solutions.
Information on battery life, charging, and monitoring.
Explains various ventilation parameters like CPAP, PEEP, and I-time.
Defines critical performance functions and compliance standards.
To Next Page
