ACUTRONIC fabian User Manual

7 Alarms 56
fabian Therapy evolution | SW V5.1.x
Ref: 121003.EN / Date: 26Jan2021
#
Alarm Text
Alarm Type
Cause
Solution
Main
Priority
Sub
Priority
Charge
battery
(<60min)
Electrical
power
• Ventilator is not
connected to
mains supply.
• Power failure.
Internal battery
remaining charge
less than 60
minutes.
Switch to mains
supply.
Alarm may be
silenced with Alarm
Silence button. The
device continues in
battery mode without
interruption.
II
8
Charge
battery
(<60min)
Electrical
power
• Ventilator is not
connected to
mains supply.
• Remaining
battery time < 30
min.
Switch to mains
supply.
Alarm may be
silenced with Alarm
Silence button. The
device continues in
battery mode without
interruption.
II
8
Charge
battery
(<30min)
Electrical
power
• Ventilator is not
connected to
mains supply.
• Remaining
battery time < 30
min.
Switch to mains
supply.
Alarm can be silenced
with Alarm Silence
button. The device
continues in battery
mode without
interruption.
II
8
High breath
rate
Patient alarms
Hyperventilation
self-trigger
• Check patient,
• Adjust frequency
• Increase trigger
threshold
II
8
Low PEEP
Patient alarms
• Leak or
disconnection.
• Insp. flow or exp.
flow set too low.
• Check patient,
• Check tubing
system for tight
connection.
• Increase flow.
II
8

ACUTRONIC fabian Specifications

General

Type	Neonatal and Pediatric Ventilator
Manufacturer	ACUTRONIC Medical Systems AG
Model	fabian
Respiratory Rate	1 - 150 bpm
FiO2 Range	21 - 100%
HFOV Frequency	5 - 20 Hz
Power Supply	100-240 V AC, 50/60 Hz
Modes of Ventilation	SIMV, CPAP, HFOV
Tidal Volume Range	2 to 300 ml
PEEP/CPAP	0-20 cmH2O
Inspiratory Time	0.1 to 3 seconds
Flow Rate	2 - 30 L/min
Flow Sensor	Integrated
Pressure Limit	10-80 cmH2O