ACUTRONIC fabian User Manual

55 7 Alarms
fabian Therapy evolution | SW V5.1.x
Ref: 121003.EN / Date: 26Jan2021
#
Alarm Text
Alarm Type
Cause
Solution
Main
Priority
Sub
Priority
High PEEP
Patient alarms
PEEP 6 mbar above
set value for at least
15 seconds.
• Check patient,
• Check patient
connection,
• Check tubing.
• Adjust settings
I
7
High SpO
2
Patient alarms
SpO2 measured
above set limit
• Check patient,
• Check SpO
2
sensor for correct
contact with
patient
• Adjust settings
II
8
Low SpO
2
Patient alarms
SpO
2
measured below
set limit
• Check patient,
• Check SpO
2
sensor for correct
contact with
patient
• Adjust settings
II
8
High Pulse
Rate
Patient alarms
Pulse rate measured
above set limit
• Check patient,
• Check SpO
2
sensor for correct
contact with
patient
• Adjust settings
II
8
Low Pulse
Rate
Patient alarms
Pulse rate measured
below set limit
• Check patient,
• Check SpO
2
sensor for correct
contact with
patient
• Adjust settings
II
8
Low Perfusion
Index
Patient alarms
Low SpO
2
perfusion
index
• Check patient,
• Check SpO
2
sensor for correct
contact with
patient
• Adjust settings
II
8
Low PIP
Patient alarms
Leak or
disconnection.
• Check patient,
• Check patient
connection.
• Check tubing
system for leaks.
• Check setting of
Pinsp.
II
8

ACUTRONIC fabian Specifications

General

Type	Neonatal and Pediatric Ventilator
Manufacturer	ACUTRONIC Medical Systems AG
Model	fabian
Respiratory Rate	1 - 150 bpm
FiO2 Range	21 - 100%
HFOV Frequency	5 - 20 Hz
Power Supply	100-240 V AC, 50/60 Hz
Modes of Ventilation	SIMV, CPAP, HFOV
Tidal Volume Range	2 to 300 ml
PEEP/CPAP	0-20 cmH2O
Inspiratory Time	0.1 to 3 seconds
Flow Rate	2 - 30 L/min
Flow Sensor	Integrated
Pressure Limit	10-80 cmH2O