ACUTRONIC fabian User Manual

12 Accessories and options 78
fabian Therapy evolution | SW V5.1.x
Ref: 121003.EN / Date: 26Jan2021
12.4.3 PRICO Ventilation modes
PRICO is available on the fabian ventilators in the following modes:
• High and Low Flow Oxygen Therapy HFNC (O
2
Therapy)
• NIV Bi-levels positive airway pressure (DUOPAP)
• NIV Continuous Positive Airway Pressure NCPAP)
The “O
2
Flush” can be activated during PRICO, this will deactivate PRICO.
• To re-enable PRICO after an O
2
Flush, push the PRICO “ON” button in
the PRICO menu.
• To disable the O
2
Flush function, set the O
2
Flush Time to 0 seconds.
The “Start/Stop” button could be used to interrupt mechanical ventilation
for 2 minutes.
In nCPAP, DUOPAP and O
2
Therapy mode ventilation can be interrupted
indefinitely.
In both cases PRICO will be switched OFF.
When PRICO is ON, this is indicated by the PRICO icon in the Status bar and the Green field with
the current FiO
2
labelled PRICO above the O
2
parameter.
Figure 12-12: PRICO “ON”

ACUTRONIC fabian Specifications

General

Type	Neonatal and Pediatric Ventilator
Manufacturer	ACUTRONIC Medical Systems AG
Model	fabian
Respiratory Rate	1 - 150 bpm
FiO2 Range	21 - 100%
HFOV Frequency	5 - 20 Hz
Power Supply	100-240 V AC, 50/60 Hz
Modes of Ventilation	SIMV, CPAP, HFOV
Tidal Volume Range	2 to 300 ml
PEEP/CPAP	0-20 cmH2O
Inspiratory Time	0.1 to 3 seconds
Flow Rate	2 - 30 L/min
Flow Sensor	Integrated
Pressure Limit	10-80 cmH2O