ADCMT 6156 - Page 258

6146/6156 DC Voltage/Current Generators Operation Manual
Alphabetical Index
I-4
SYS ......................................................... 3-8
[T]
TC.OUT .................................................. 3-4
TC.STD ................................................... 3-5
TC.TYP ................................................... 3-5
TECHNICAL REFERENCES ................ 4-1
TEMP ...................................................... 3-4
TEST ....................................................... 3-8
Test Method ............................................ 6-1
Thermal Electromotive Force Output ..... 2-55
Thermal Electromotive Force Output Operation 2-55
Transport ................................................. 1-11
TRIG HOLD Key
(Trigger and Hold for Memory
Recall/Sweep Source) ............................. 3-12
TRIGGER IN .......................................... 4-22
[U]
UNIT Key (Continuous Key Down) ....... 3-13
UNIT Key (Continuous Key UP) ........... 3-13
UP Key (Increasing the Source Range) .. 3-13
USB ......................................................... 5-12
USB Overview ........................................ 5-12
USB Specifications ................................. 5-12
USBid ...................................................... 3-7
Using Interface ........................................ 5-1
[V]
V/I Key (Changing the Source Function) 3-13
Voltage/Current Source .......................... 8-1
[W]
Warm-up Time ........................................ 1-12
When Problems Occur
(Before Requesting Repairs) ................... A-1