6146/6156 DC Voltage/Current Generators Operation Manual
1.7 Cleaning, Storage, and Transport Methods
1-11
1.7 Cleaning, Storage, and Transport Methods
1.7.1 Cleaning
Clean the 6146/6156 by wiping or brushing its surface with a soft cloth or cloth which has been dampened
in water containing a mild detergent.
CAUTION:
1. Ensure that water does not penetrate the 6146/6156 (wring out the cloth so it is damp and not saturated).
2. Avoid using organic solvents such as benzene, toluene, xylene, acetone, etc. They will cause deformation of
the plastic parts.
1.7.2 Storage
Store the 6146/6156 in a location where the temperature is within the range of -25°C to +70°C. If storing
for an extended period (90 days or longer), place the 6146/6156 in a moisture-proof bag together with a
desiccant. Avoid storing the 6146/6156 in a location where there is a lot of dust or where it will be sub-
jected to direct sunlight.
1.7.3 Transport
To transport the 6146/6156, use the original box that it came in. If the box is not available any longer, pack
the 6146/6156 in accordance with the following guidelines.
Packing procedure
1. Prepare a corrugated cardboard box with dimensions that are larger than the
external dimensions of the 6146/6156 by 15 cm or more to allow for shock absor-
bent material.
2. Wrap the6146/6156 with a protective sheet.
3. Line the box with shock absorbing material so that the 6146/6156 is protected on
all sides by cushioning material.
4. Close the box with industrial staples or use packing tape.
When sending the 6146/6156 to an ADC CORPORATION sales representative for service or repairs,
attach a label stating the following items.
• Company name and address
• Name of the person in charge
• Serial number (shown on the rear panel)
• Type of service required
To Next Page
Loading...
Need help?
General
