6146/6156 DC Voltage/Current Generators Operation Manual
1.11 Product Disposal and Recycling
1-13
1.11 Product Disposal and Recycling
Correctly dispose of the 6146/6156 in accordance with local and national regulations.
Before disposal, remove the following parts from the product to prevent dispersal of substances that may
adversely affect the environment, human health, or the ecosystem.
NOTE: For assistance with locating a waste disposal company, contact an ADC CORPORATION sales represen-
tative.
Name of substance or removed part Used? Location Unit Part
Capacitor containing polychlorinated biphenyls
(PCBs)
No -
Part containing mercury No -
Battery No -
Printed circuit boards Yes Unit MAIN Printed circuit boards
Toner cartridge No -
Plastic containing brominated flame retardants Yes Unit BLL-008011
BLF-008012
BLB-008013
Connectors, diodes, Zener
diodes, photocouplers,
FET, analog ICs, logic
ICs, FLASH memory,
transistors
Parts containing asbestos No -
Cathode-ray tubes No -
Chloroflourocarbon (CFC), hydrochlorofluoro-
carbon (HCFC), hydrofluorocarbon (HFC), or
hydrocarbon (HC)
No -
Electric-discharge indicator No -
LCD display of 100 cm
2
or larger
No -
Connecting cable Yes Between
units
Power cable
Parts containing flame-resistant ceramic fibers Yes - Output terminal
Parts containing radioactive material No -
Electrolytic capacitors containing substance of
concern
(With height > 25 mm, dia. > 25 mm, or equiv-
alent volume)
No -
Arsenic or its compounds Yes Unit Electronic
components
Photocoupler, logic IC
Nickel or its compounds Yes Unit Electronic components,
mechanical components
To Next Page
Loading...
Need help?
General
