Name: ADCMT 6243
Brand: ADCMT
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6243/44 DC Voltage Current Source/Monitor Operation Manual

8.1.6 Initializing Calibration Data

8-9

8.1.6 Initializing Calibration Data

Normally, the calibration data is not initialized unless the calibration values are abnormal for one reason

or another.

NOTE: When calibration data is initialized and saved, the default calibration values are saved and the previous

calibration data is lost.

Be sure to recalibrate all the ranges in this case.

1. Select Init to Default on the Calibration Item Selection screen in the calibration

mode and press the button.

2. Press the DIRECT button.

Upon completion of calibration data initialization, “Done” appears.

Init to Default

Execute (Press DIRECT Key)

Questions and Answers:

Need help?

Do you have a question about the ADCMT 6243 and is the answer not in the manual?

ADCMT 6243 Specifications

General