ADPRO iFT Series - Modem; Modem Connection

ADPRO iFT Series Hardware Installation Manual
27817_08 45
11 Modem
YoucanconnectonemodemtotheXOdevice,tothe/dev/ttyU1USBport.YoucanuseeitheraPSTN/ISDNor
a3G/4Gmodem.
l PSTN or ISDN modem:youconnectaclassicPSTN(ISDN)modemwithserialporttothedevicebymeans
ofaUSB-to-RS-232converter.ThisUSB-to-RS-232converterneedsaspecificFTDIchip.
TheStollmanTA+USBAistheonlyISDNmodemwithUSBinterfacethatyoucanusewithoutaconverter.
l 3G/4G modem:theXOdevicesupportsonlytheSierraWirelessAirlinkRavenXEmodem.Honeywelldoes
notguaranteethatanyother3G/4Gmodemwillworkproperly.
WithfirmwareversionXO4.02andabove,youcanalsousethe4GHuaweiE8372wingle.Fordetails,see4G
Via Wingleonpage46.
ConnectthemodemtoUSBinput1(/dev/ttyU1).
RestarttheXOclientsoftwarebeforeconfiguringthemodem.Formoreinformation,seetheXO Client Software
User Manual(21796).