ADPRO iFT Series - 20.2 After a Full Reset

iFT Series Hardware Installation Manual ADPRO
74 27817_08
22. Re-inserttheSATAcabletoconnecttheDOMtothemotherboard.
23. Re-inserttheDOM’spowercable.
24. Putthecoverbackinplaceandswitchonthepowersupply.TheXOdevicerestarts.
25. ReconnecttheXOclienttotheXOdeviceusingthedefaultIPaddress(10.0.0.10)andthe
username/passwordofadefaultuser.
20.2 After a Full Reset
Afterafullreset,thesystemcontainsnomorelicenses.Thesystemlicenseisnolongeravailableeither.AnXO
devicerunningwithoutsystemlicensewillinformtheuserofthelicenseerrorviatheeventmessage0013–
[SYST]–SYSTEMLICENSEERROR,andviaapopupwindowateachconnectionwiththeXOclient.Youhave
torestorethesystemlicenseimmediatelytohaveaccesstofullfunctionality.
YoucanrestoreyoursystemlicenseviatheTransfer functionintheXOclient.Insomecases,youcanalsotry
torestorethesystemlicenseusingXchange.Fordetails,seetheXchange Tool User Manual(27816).
Youcanrestore:
l thesystemlicense:viatheXOclientfromthebackupthatyoumadebeforeresetting,orviaXchange(if
available).
l theapplicationlicenses:viaXchange.
l otherfiles(configurations,calibrationpictures…):viatheXOclientfromthebackupthatyoumadebefore
resetting.
YouwillneedtoreconfiguretheMIOcardandNetI/Ounitsmanually.