ADPRO iFT Series - Default Chapter; Table of Contents

ADPRO iFT Series Hardware Installation Manual
27817_08 5
Contents
1 Technical Specifications 7
2 About the iFT Series 9
2.1 Models 9
2.2 Licenses 9
2.2.1 Overview 9
2.2.2 SystemLicense 10
2.3 Software 10
2.4 PartsInformation 10
3 Hard Disks 11
3.1 RequiredHardDiskCapacity 11
3.2 Adding/ReplacingaHardDisk 11
3.3 ReusingUsedHardDisks 12
3.4 RetrievingHardDiskInformation 12
3.4.1 Usingtheta,smartCommand 12
3.4.2 UsingtheXOClientSoftware 13
3.5 InstallingtheFirstHardDisk 13
3.6 InstallingaSecondHardDisk 16
3.7 InstallingaThirdDiskinaniFTDevice 19
3.8 InstallingaThirdandFourthDiskinaniFT-EDevice 22
3.9 RAID1Support 26
3.9.1 AboutRAID1 26
3.9.2 ActivatingRAID1 26
3.9.3 RetrievingRAID1Information 27
3.10 RemoteFormattingofHardDisks 27
4 Front LED Indicators 29
5 Motherboards 30
5.1 Overview 30
5.2 BIOSSettings 30
5.3 Connectors 30
5.4 ReplacingtheMotherboard 31
5.5 ReplacingtheMotherboardBattery 31
6 Connecting IP Cameras 32
7 Main I/O Card 34
7.1 Features 34
7.2 ConnectionofInputsandOutputs 34
7.2.1 OverviewofInputsandOutputs 34
7.2.2 InputCircuits 34
7.2.3 ConnectingInputsandOutputs 35
7.2.4 CableStrainRelief 36
7.3 ConfiguringtheMIOCard 36
8 XO I/O Interface USB Modules 37
8.1 AbouttheXOI/OInterfaceUSBModules 37
8.2 LoggingontotheHardwareConfigurationTool 38
8.3 MappingtheXOI/OInterfaceUSBModules 40
8.4 ResettingtheHardwareMapping 42