ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 4 Web Service
Tampering
The Tampering feature alerts you when the detected motion signal exceeds the sensitivity threshold
set here.
Note: Tampering does not support anti-dither, sensitivity, or region setup.
Figure 4-50
Enable
Check the box to enable the Tampering function. Then select a channel from the dropdown list.
Period
This feature activates the Tampering function for the specified periods.
To set the Tampering period:
1. Click the Setup button.
2. In the resulting setup dialog, select a day of the week from the drop-down menu.
3. For the selected day, check the box for one of the six 24-hour time periods and set the
corresponding recording range.
4. Repeat for other time periods if desired.
5. Click Save. The system reverts to the Tampering page.
NVR4200 Series User Guide
169

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English