Hybrid Standalone NVR User Guide 4 Web Service
• 24-HOUR
• 12-HOUR.
System Time
This field displays the current system time. Click the Sync PC button to set your PC’s current time as
the system time.
DST
Check the box to enable Daylight Savings Time (DST).
DST Type
Set the DST beginning time and ending times, in either a date or week format.
Select the radio button that represents how you want the date displayed:
o Date. Uses the format selected in the Date Format field.
o Day of Week. Uses the format: Month Week Day Time, as follows.
NTP
Check the box to enable the Network Time Protocol (NTP) function.
Time Zone
Use the drop-down list to select your time zone adjustment from GMT.
Server
Enter the address of the NTP server. Click the Manual Update button to force a time-sync with the
NTP server.
Port
Set the NTP time server port.
Update Period
Set the frequency in minutes at which the device syncs with the time server. You can force a sync
using the Manual Update button. The range is 0-65535 minutes, with a default of 60.
Holiday Setup
Use this tab to set holiday dates.
NVR4200 Series User Guide
194
To Next Page
Loading...
Need help?
General