Hybrid Standalone NVR User Guide 4 Web Service
4.7.5.4 Alarm Out
This function enables you to set the alarm output mode: auto/manual/stop.
Figure 4-92
4.7.5.5 Default
The Default page enables you to reset default settings to all sections of the Web service from one
location. Here you can select the Channel, Network, Event, Storage, or System sections individually;
or else you can check the All box to select all items. Check the boxes for the sections you wish to
reset and then click the Default button.
Figure 4-93
NVR4200 Series User Guide
206
To Next Page
Loading...