Preface
Preface
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Important Safeguards and Warnings
Electrical Safety
All installation and operation here should conform to your local electrical safety codes. The product
must be grounded to reduce the risk of electric shock. ADT assumes no liability or responsibility for all
the fires or electrical shock caused by improper handling or installation.
Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
Installation
• Keep upright
• Handle with care
• Do not apply power to the NVR before completing the installation
• Do not place objects on top of the NVR
Qualified Service Personnel
All examination and repair work should be performed only by qualified service personnel. ADT is not
liable for any problems caused by unauthorized modifications or attempted repair.
Environment
The NVR should be installed in a cool, dry place away from direct sunlight.
Accessories
• Be sure to use only the accessories recommended by manufacturer.
• Before installation, open the package and check that all the components are included.
• Contact us if something is damaged in the package.
Lithium Battery
• When replacing the battery, make sure you are using the same type.
• Improper battery use may result in fire, explosion or personal injury.
NVR4200 Series User Guide
vii
To Next Page
Loading...
Need help?
General