ADT NVR4200 Series User Manual

Hybrid Standalone NVR User Guide 3 Local Menu Operations
PTZ Activation
Select this feature to set Pan/Tilt/Zoom movement when an event occurs.
• Select. Click this button to open the PTZ Activation screen for setting up the camera.
Figure 3-29
Tour
Enable the tour function to present an alternating display (much like a slideshow) of the channel(s)
you have set to record when a motion detect event occurs. Refer to section 3.6.2.2 TV Adjust
Tab
on page 89 for tour interval setup.
Snapshot
Enable this function to take a snapshot image when a motion detect event occurs.
Buzzer
Enable this function to sound an audible tone from the NVR when the event occurs.
Test
Click this test the current motion detect setup. See section 3.4.1.1 Motion Detection on page 61.
Note:
• In the Detect main screen, the copy/paste function is only valid for the same event type. In
other words, you cannot copy a channel setup in Video Loss mode and paste it to a channel
in Tampering mode.
• The Default function is only available for the current event type. For example, if you click the
Default button in the Tampering dialog, only the default Tampering setup is restored to
default settings. It does not affect other detection types.
NVR4200 Series User Guide
61

ADT NVR4200 Series Specifications

General

Brand	ADT
Model	NVR4200 Series
Category	Network Hardware
Language	English